We ship our products to US
Ready to Print Desktop 3D Printer

Rabbit Printer

Lead Time: 2 weeks

A 3D printer designed for everyone!
Made from steel and with an A/C 220V/250Watts heated bed is ready to print every material available on the market.

€ 588.70 excl. VAT
includes 24% VAT


Rabbit Printer view 0
Rabbit Printer view 1
Rabbit Printer view 2
PLA Dinosaur






  • 8 Litres
  • 200 x 200 x 200 mm
  • Max Speed: 150mm/sec
  • Max Resolution: 0.05mm
  • Type: Silicone Heated Bed
  • Surface: 3mm Aluminum
  • Voltage: A/C 220V
  • Power: 250Watts




  • RAMPS 1.4 with
    Repetier Firmware
  • Trapezoidal Leadscrew
  • Acetal Anti-Backlash Nuts
  • Material: ST37-2 Steel
  • Thickness: 4mm




  • 1.75mm filaments
  • PLA, ABS, ABS+, FPE,
    and similar materials
  • 500 Watts
  • Input: 120 / 240 V
  • 2GB SD Card
  • USB SD Card Reader
  • Power Cable
  • User Manual


What will you make with Rabbit Printer


Rabbit Printer is a Plug & Play 3D Printer made from metal. It has a 220V A/C heated bed and has a printing volume of 8 litres (20x20x20cm). Its rigid metal frame makes the Rabbit Printer able to print your designs with 50microns layer resolution in high speeds (up to 120mm/sec).

If you compare the build volume and Print Quality of Rabbit Printer to other consumer printers in the same category and price range you will discover that Rabbit Printer offers the best print quality.
Rabbit Printer Print Quality
The above images shows the REAL print quality of the Rabbit Printer in different layer resolutions

Rabbit Printer
ships fully assembled!

No Manual to read

Forget about reading manuals and spending hours
to fit every cable and screw.

No cables

Just plug into the power line and you are
ready to print your designs !


AC 240V heated Bed

240V/250Watts A/C Heated Bed

Rabbit Printer is equiped with a 240V/250Watts heated bed that needs seconds to reach and maintain temperature up to 150°C.

Our high quality heated bed is made from a silicone heated pad sticked on a piece of 3mm thick 1050 aluminum alloy. It heats up from 25°C to 110°C in seconds and it maintains temperature evenly on the whole bed area in order to avoid warping when you print high temperature materials such as ABS.

Solid State Relay for the Heated Bed

Solid State Relay

The Heated Bed's on-off switch is a Solid State Relay rated for 250Volts A/C with on-off time ≤10ms.

The main reason we choose Solid State Relays is the really long life expectancy (>2 million hours).

J-Head Hot End

J-Head Hot End

Rabbit Printer is equipped with a V6 J-Head Hot End with 0.4mm nozzle for 1.75mm filaments.

This hotend is able to maintain temperature up to 260°C~270°C so printing high temperature materials is now easier than ever.


Print Quality

50 Microns Print Quality

The Z-Axis TR10x2 trapezoidal leadscrews combined with the anti-backlash Acetal nuts allows allows users to print their designs with layer height as small as 50 microns (0.05mm)

At the high print quality contributes the ridgit full metal frame of the Rabbit Printer.

Open Source Hardware

Open Source Hardware

Rabbit Printers comes with an Arduino Mega, preloaded with the latest Repetier Firmware, and a RAMPS 1.4 Shield  as a controller.

The main reasons we chose Arduino and the Repetier firmware are their ease of use, stellar performance and of course cost effectiveness.

Open Source Hardware

Ready to Print Settings

We provide optimized print settings for the Rabbit Printer so you do not have to waste your time searching online.

You can download the settings under our download section.